Learn how to set up your device when connecting to NAPAfrica
Configuration Guides
It is simple to follow the guides. Take a look at the example configurations listed below. If you wish to check your configuration before connecting, or at any time after connection, please get in touch with NAPAfrica technical support, and we will be happy to advise.
Arista
Global Config
no ip multicast-routing
VLAN Config
vlan 300 name IX_NAME
Interface Config
As Intermediate Switch
interface ethernetY description IX_NAME switchport access vlan 300 arp timeout 7200 ipv6 enable ipv6 nd ra suppress all no lldp transmit no ntp serve spanning-tree bpdufilter enable
As Router
interface ethernetY no switchport description IX_NAME ipv6 enable ipv6 nd ra suppress all no lldp transmit no ntp serve ip address x.x.x.x y.y.y.y ipv6 address x::y/64 arp timeout 7200 no lldp transmit no ip pim
Basic BGP Config
prefix-lists
ip prefix-list BOGONSIPv4 seq 10 deny 0.0.0.0/8 le 32 ip prefix-list BOGONSIPv4 seq 20 deny 10.0.0.0/8 le 32 ip prefix-list BOGONSIPv4 seq 30 deny 100.64.0.0/10 le 32 ip prefix-list BOGONSIPv4 seq 40 deny 127.0.0.0/8 le 32 ip prefix-list BOGONSIPv4 seq 50 deny 169.254.0.0/16 le 32 ip prefix-list BOGONSIPv4 seq 60 deny 172.16.0.0/12 le 32 ip prefix-list BOGONSIPv4 seq 70 deny 192.0.0.0/24 le 32 ip prefix-list BOGONSIPv4 seq 80 deny 192.0.2.0/24 le 32 ip prefix-list BOGONSIPv4 seq 90 deny 192.168.0.0/16 le 32 ip prefix-list BOGONSIPv4 seq 100 deny 198.18.0.0/15 le 32 ip prefix-list BOGONSIPv4 seq 110 deny 198.51.100.0/24 le 32 ip prefix-list BOGONSIPv4 seq 120 deny 203.0.113.0/24 le 32 ip prefix-list BOGONSIPv4 seq 130 deny 224.0.0.0/3 le 32 ip prefix-list BOGONSIPv4 seq 9999 permit 0.0.0.0/0 le 24 ipv6 prefix-list BOGONSIPv6 deny 3ffe::/16 le 128 ipv6 prefix-list BOGONSIPv6 deny 2001:db8::/32 le 128 ipv6 prefix-list BOGONSIPv6 permit 2001::/32 ipv6 prefix-list BOGONSIPv6 deny 2001::/32 le 128 ipv6 prefix-list BOGONSIPv6 permit 2002::/16 ipv6 prefix-list BOGONSIPv6 deny 2002::/16 le 128 ipv6 prefix-list BOGONSIPv6 deny 0000::/8 le 128 ipv6 prefix-list BOGONSIPv6 deny fe00::/9 le 128 ipv6 prefix-list BOGONSIPv6 deny ff00::/8 le 128 ipv6 prefix-list BOGONSIPv6 permit 2000::/3 le 48 ipv6 prefix-list BOGONSIPv6 deny 0::/0 le 128 ip prefix-list MY_V4_PREFIXES seq 10 permit x.x.x.x/y eq/le/ge n ip prefix-list DOWNSTREAM_V4_PREFIXES seq 10 permit x.x.x.x/y eq/le/ge n ipv6 prefix-list MY_V6_PREFIXES permit x::/y eq/le/ge n ipv6 prefix-list DOWNSTREAM_V6_PREFIXES permit x::/y eq/le/ge n
route-maps
route-map EBGP_V4_OUT permit 10
match ip address prefix-list MY_V4_PREFIXES
set community A:N
route-map EBGP_V4_OUT permit 20
match ip address prefix-list DOWNSTREAM_V4_PREFIXES
set community A:N
route-map EBGP_V6_OUT permit 10
match ipv6 address prefix-list MY_V6_PREFIXES
set community A:N
route-map EBGP_V6_OUT permit 20
match ipv6 address prefix-list DOWNSTREAM_V6_PREFIXES
set community A:N
route-map IX_NAME_V4_IN deny 10
match ip address prefix-list BOGONSIPv4
route-map IX_NAME_V4_IN permit 20
set local-preference {YOUR_LOCAL_PREF}
set community A:N
route-map IX_NAME_V6_IN deny 10
match ip address prefix-list BOGONSIPv6
route-map IX_NAME_V6_IN permit 20
set local-preference {YOUR_LOCAL_PREF}
set community A:N
router bgp
router-id x.x.x.x
network x.x.x.x/y
neighbor IX_NAME_V4 peer-group
neighbor IX_NAME_V4 remove-private-as all
neighbor IX_NAME_V4 local-v4-addr 196.10.140.39
neighbor IX_NAME_V4 route-map IX_NAME_V4_IN in
neighbor IX_NAME_V4 route-map IX_NAME_V4_OUT out
neighbor IX_NAME_V4 send-community
neighbor IX_NAME_V4 maximum-routes 12000
neighbor IX_NAME_V4 graceful-restart
neighbor IX_NAME_V4 soft-reconfiguration inbound all
neighbor IX_NAME_V6 peer-group
neighbor IX_NAME_V6 remove-private-as all
neighbor IX_NAME_V6 route-map IX_NAME_V6_IN in
neighbor IX_NAME_V6 route-map IX_NAME_V6_OUT out
neighbor IX_NAME_V6 send-community
neighbor IX_NAME_V6 maximum-routes 12000
neighbor IX_NAME_V6 graceful-restart
neighbor IX_NAME_V6 soft-reconfiguration inbound all
neigh x.x.x.y peer-group IX_NAME_V4
neigh x.x.x.y remote-as {PEER_ASN}
neigh x.x.x.y description DESCRIPTION
neigh x::y peer-group IX_NAME_V6
neigh x::y remote-as {PEER_ASN}
neigh x::y description IX_NAME_ROUTE_SERVER
no neighbor x::y enforce-first-as
address-family ipv4
neighbor IX_NAME_V4 activate
!
address-family ipv6
neighbor IX_NAME_V6 activate
Brocade
VLAN Config
vlan 300 name "IX_NAME" by port no spanning-tree untagged ethernet X/Y
Interface Config
interface ethernet X/Y port-name "IX_NAME" route-only no spanning-tree ipv6 nd suppress-ra no vlan-dynamic-discovery ip address x.x.x.x y.y.y.y ipv6 address x::y/64 no ip redirect no ipv6 redirect ip arp-age 120
Cisco
IOS
Global Config
no cdp run no service dhcp no ip bootp server no service config
Direct Connection to IX
This example assumes direct connection to the IX switch (i.e. No intermediate switch)
Config (IOS)
Interface GigabitEthernet0/1 ip address x.x.x.x y.y.y.y ipv6 address x::y/64 description PEERING:: IX_NAME no ip redirects no ip proxy-arp no cdp enable no ip directed-broadcast no mop enable no keepalive no ipv6 mld router no ipv6 mfib forwarding ipv6 nd suppress-ra (1) ipv6 nd ra suppress (2) ipv6 nd ra supress all (3) no ipv6 pim no ipv6 mld snooping ipv6 nd prefix default no-advertise
Config (IOS-XR)
interface IFNAME ipv4 address x.x.x.x/y ipv4 verify unicast source reachable-via any ipv4 unreachables disable arp timeout 14400 ipv6 nd dad attempts 0 ipv6 nd suppress-ra ipv6 nd reachable-time 14400000 [or 3600000 if max-constrained] ipv6 verify unicast source reachable-via any ipv6 unreachables disable ipv6 address x::y/64 lldp transmit disable ! negotiation auto
Connection via Intermediate Switch
If you are connecting to the IX via an intermediate Cisco switch, use the following configuration on the switch:
Switch Config (29xx/35xx):
vtp mode transparent no lldp run no cdp run Interface GigabitEthernet0/2 description Link facing IX switchport access vlan 300 switchport mode access switchport nonegotiate no keepalive no udld enable no cdp enable no lldp receive no lldp transmit spanning-tree bpdufilter enable end vlan 300 name IX_NAME Interface GigabitEthernet0/1 description Link facing my router switchport mode trunk switchport trunk allowed vlan 300
Switch Config (7600)
no service dhcp no ip bootp server vtp mode transparent spanning-tree mode pvst spanning-tree extend system-id no spanning-tree vlan 300 ! vlan 300 name IX_NAME exit ! interface GigabitEthernet6/0/0 description IX_NAME switchport access vlan 300 switchport mode access switchport nonegotiate no mls qos trust no cdp enable spanning-tree bpdufilter enable exit !
Switch Config (CatOS)
set vtp mode off set port name /IfIdent/ IX_NAME set cdp disable /IfIdent/ set udld disable /IfIdent/ set trunk /IfIdent/ off dot1q set spantree bpdu-filter /IfIdent/ enable set vlan 300 name IX_NAME set vlan 300 /IfIdent
Router config (IOS)
Interface GigabitEthernet0/0 description: Link facing intermediate switch no ip address Interface GigabitEthernet0/0.300 ip address x.x.x.x y.y.y.y ipv6 address x::y/64 description PEERING:: IX_NAME no ip redirects no ip proxy-arp no cdp enable no ip directed-broadcast no mop enable no keepalive no ipv6 mld router no ipv6 mfib forwarding ipv6 nd suppress-ra (1) ipv6 nd ra suppress (2) ipv6 nd ra supress all (3) no ipv6 pim no ipv6 mld snooping ipv6 nd prefix default no-advertise
Juniper
set interfaces ae3 description "IX_NAME”
set interfaces ae3 mtu 9192
set interfaces ae3 aggregated-ether-options minimum-links 1
set interfaces ae3 aggregated-ether-options link-speed 10g
set interfaces ae3 aggregated-ether-options lacp active
set interfaces ae3 aggregated-ether-options lacp periodic fast
set interfaces ae3 aggregated-ether-options lacp link-protection disable
set interfaces ae3 aggregated-ether-options lacp link-protection revertive
set interfaces xe-x/x/x description "IX_NAME_AE3”
set interfaces xe-x/x/x gigether-options 802.3ad ae3
set interfaces xe-x/x/y description "IX_NAME_AE3”
set interfaces xe-x/x/y gigether-options 802.3ad ae3
set interfaces ae3 unit 0 bandwidth 20g
set interfaces ae3 unit 0 family inet sampling input
set interfaces ae3 unit 0 family inet sampling output
set interfaces ae3 unit 0 family inet address x.x.x.x/y
set interfaces ae3 unit 0 family inet no-redirects
set interfaces ae3 unit 0 family inet6 address x::y/64
OR
set interfaces xe-x/y/z unit 0 description "IX_NAME"
set interfaces xe-x/y/z unit 0 bandwidth 10g
set interfaces xe-x/y/z unit 0 family inet sampling input
set interfaces xe-x/y/z unit 0 family inet sampling output
set interfaces xe-x/y/z unit 0 family inet address x.x.x.x/y
set interfaces xe-x/y/z unit 0 family inet no-redirects
set interfaces xe-x/y/z unit 0 family inet6 address x::y/64
set protocols bgp group IX_NAME_LG type external
set protocols bgp group IX_NAME_LG neighbor x.x.x.1 description IX_NAME_LG
set protocols bgp group IX_NAME_LG peer-as {COLLECTOR_AS}
set protocols bgp group IX_NAME_LG neighbor x.x.x.1 local-address x.x.x.x
set protocols bgp group IX_NAME_LG neighbor x.x.x.1 import ROUTE_COLLECTOR_IN
set protocols bgp group IX_NAME_LG neighbor x.x.x.1 export EBGP-EXPORT-TJB
set protocols bgp group IX_NAME_LG neighbor x.x.x.1 remove-private
set protocols bgp group IX_NAME_RS type external
set protocols bgp group IX_NAME_RS peer-as {ROUTE_SERVER_AS}
set protocols bgp group IX_NAME_RS neighbor x.x.x.2 description IX_NAME_RS1
set protocols bgp group IX_NAME_RS neighbor x.x.x.2 local-address x.x.x.x
set protocols bgp group IX_NAME_RS neighbor x.x.x.2 import [ REJECT-BOGONMARTIAN IX_NAME_RS_IN ]
set protocols bgp group IX_NAME_RS neighbor x.x.x.2 family inet unicast prefix-limit maximum 100000
set protocols bgp group IX_NAME_RS neighbor x.x.x.2 export EBGP-EXPORT-TJB
set protocols bgp group IX_NAME_RS neighbor x.x.x.2 remove-private
set protocols bgp group IX_NAME_RS neighbor x.x.x.3 description IX_NAME_RS2
set protocols bgp group IX_NAME_RS neighbor x.x.x.3 local-address x.x.x.x
set protocols bgp group IX_NAME_RS neighbor x.x.x.3 import [ REJECT-BOGONMARTIAN IX_NAME_RS_IN ]
set protocols bgp group IX_NAME_RS neighbor x.x.x.3 family inet unicast prefix-limit maximum 100000
set protocols bgp group IX_NAME_RS neighbor x.x.x.3 export EBGP-EXPORT-TJB
set protocols bgp group IX_NAME_RS neighbor x.x.x.3 remove-private
set protocols bgp group IX_NAME_V6 type external
set protocols bgp group IX_NAME_V6 local-address x::y
set protocols bgp group IX_NAME_V6 export IX_NAME_v6_OUT
set protocols bgp group IX_NAME_V6 neighbor x::1 description IX_NAME_LG-v6
set protocols bgp group IX_NAME_V6 neighbor x::1 import ROUTE_COLLECTOR_IN
set protocols bgp group IX_NAME_V6 neighbor x::1 remove-private
set protocols bgp group IX_NAME_V6 neighbor x::1 peer-as {COLLECTOR_AS}
set protocols bgp group IX_NAME_V6 neighbor x::2 description IX_NAME_RS1_v6
set protocols bgp group IX_NAME_V6 neighbor x::2 import [ REJECT-BOGONMARTIAN IX_NAME_v6_IN ]
set protocols bgp group IX_NAME_V6 neighbor x::2 remove-private
set protocols bgp group IX_NAME_V6 neighbor x::2 peer-as {ROUTE_SERVER_AS}
set protocols bgp group IX_NAME_V6 neighbor x::3 description IX_NAME_RS2_v6
set protocols bgp group IX_NAME_V6 neighbor x::3 import [ REJECT-BOGONMARTIAN IX_NAME_v6_IN ]
set protocols bgp group IX_NAME_V6 neighbor x::3 remove-private
set protocols bgp group IX_NAME_V6 neighbor x::3 peer-as {ROUTE_SERVER_AS}
set policy-options policy-statement IX_NAME_v6_OUT term SELF from family inet6
set policy-options policy-statement IX_NAME_v6_OUT term SELF from protocol aggregate
set policy-options policy-statement IX_NAME_v6_OUT term SELF from route-filter {MY_PREFIXES} exact
set policy-options policy-statement IX_NAME_v6_OUT term SELF then accept
set policy-options policy-statement IX_NAME_v6_OUT term TRANSIT from family inet6
set policy-options policy-statement IX_NAME_v6_OUT term TRANSIT from community transit-cust-with-own-routes
set policy-options policy-statement IX_NAME_v6_OUT term TRANSIT from route-filter ::0/0 upto /48
set policy-options policy-statement IX_NAME_v6_OUT term TRANSIT then accept
set policy-options policy-statement IX_NAME_v6_OUT term REJECT-ALL-ELSE then reject
set policy-options policy-statement IX_NAME_v6_IN term RECEIVE-ALL from protocol bgp
set policy-options policy-statement IX_NAME_v6_IN term RECEIVE-ALL then community set ix-tjb
set policy-options policy-statement IX_NAME_v6_IN term RECEIVE-ALL then community add ix_peer
set policy-options policy-statement IX_NAME_v6_IN term RECEIVE-ALL then accept
set policy-options policy-statement REJECT-BOGONMARTIAN term OWN_PREFIXES from route-filter {MY_PREFIXES} orlonger
set policy-options policy-statement REJECT-BOGONMARTIAN term OWN_PREFIXES from route-filter {MY_PREFIXES} orlonger
set policy-options policy-statement REJECT-BOGONMARTIAN term OWN_PREFIXES then reject
set policy-options policy-statement REJECT-BOGONMARTIAN term v4_MARTIANS from family inet
set policy-options policy-statement REJECT-BOGONMARTIAN term v4_MARTIANS from route-filter 0.0.0.0/0 exact
set policy-options policy-statement REJECT-BOGONMARTIAN term v4_MARTIANS from route-filter 0.0.0.0/8 orlonger
set policy-options policy-statement REJECT-BOGONMARTIAN term v4_MARTIANS from route-filter 10.0.0.0/8 orlonger
set policy-options policy-statement REJECT-BOGONMARTIAN term v4_MARTIANS from route-filter 100.64.0.0/10 orlonger
set policy-options policy-statement REJECT-BOGONMARTIAN term v4_MARTIANS from route-filter 127.0.0.0/8 orlonger
set policy-options policy-statement REJECT-BOGONMARTIAN term v4_MARTIANS from route-filter 169.254.0.0/16 orlonger
set policy-options policy-statement REJECT-BOGONMARTIAN term v4_MARTIANS from route-filter 172.16.0.0/12 orlonger
set policy-options policy-statement REJECT-BOGONMARTIAN term v4_MARTIANS from route-filter 192.0.0.0/24 orlonger
set policy-options policy-statement REJECT-BOGONMARTIAN term v4_MARTIANS from route-filter 192.0.2.0/24 orlonger
set policy-options policy-statement REJECT-BOGONMARTIAN term v4_MARTIANS from route-filter 192.88.99.0/24 orlonger
set policy-options policy-statement REJECT-BOGONMARTIAN term v4_MARTIANS from route-filter 192.168.0.0/16 orlonger
set policy-options policy-statement REJECT-BOGONMARTIAN term v4_MARTIANS from route-filter 198.18.0.0/15 orlonger
set policy-options policy-statement REJECT-BOGONMARTIAN term v4_MARTIANS from route-filter 198.51.100.0/24 orlonger
set policy-options policy-statement REJECT-BOGONMARTIAN term v4_MARTIANS from route-filter 203.0.113.0/24 orlonger
set policy-options policy-statement REJECT-BOGONMARTIAN term v4_MARTIANS from route-filter 224.0.0.0/4 orlonger
set policy-options policy-statement REJECT-BOGONMARTIAN term v4_MARTIANS then reject
set policy-options policy-statement REJECT-BOGONMARTIAN term v6_MARTIANS from family inet6
set policy-options policy-statement REJECT-BOGONMARTIAN term v6_MARTIANS from route-filter 3ffe::/16 orlonger
set policy-options policy-statement REJECT-BOGONMARTIAN term v6_MARTIANS from route-filter 0000::/8 orlonger
set policy-options policy-statement REJECT-BOGONMARTIAN term v6_MARTIANS from route-filter 2001:db8::/32 orlonger
set policy-options policy-statement REJECT-BOGONMARTIAN term v6_MARTIANS from route-filter 2001::/32 exact next policy
set policy-options policy-statement REJECT-BOGONMARTIAN term v6_MARTIANS from route-filter 2001::/32 longer
set policy-options policy-statement REJECT-BOGONMARTIAN term v6_MARTIANS from route-filter 2002::/16 exact next policy
set policy-options policy-statement REJECT-BOGONMARTIAN term v6_MARTIANS from route-filter 2002::/16 longer
set policy-options policy-statement REJECT-BOGONMARTIAN term v6_MARTIANS from route-filter fe00::/9 orlonger
set policy-options policy-statement REJECT-BOGONMARTIAN term v6_MARTIANS from route-filter ff00::/8 orlonger
set policy-options policy-statement REJECT-BOGONMARTIAN term v6_MARTIANS from route-filter 2000::/3 prefix-length-range /49-/128
set policy-options policy-statement REJECT-BOGONMARTIAN term v6_MARTIANS from route-filter 0::/0 orlonger
set policy-options policy-statement REJECT-BOGONMARTIAN term v6_MARTIANS then reject
set policy-options policy-statement REJECT-BOGONMARTIAN then next policy
set policy-options policy-statement IX_NAME_RS_IN term RECEIVE-ALL from protocol bgp
set policy-options policy-statement IX_NAME_RS_IN term RECEIVE-ALL then metric 0
set policy-options policy-statement IX_NAME_RS_IN term RECEIVE-ALL then local-preference 105
set policy-options policy-statement IX_NAME_RS_IN term RECEIVE-ALL then community set ix-tjb
set policy-options policy-statement IX_NAME_RS_IN term RECEIVE-ALL then community add ix_peer
set policy-options policy-statement IX_NAME_RS_IN term RECEIVE-ALL then accept
set policy-options policy-statement ROUTE_COLLECTOR_IN term REJECT-ALL then reject
set policy-options policy-statement EBGP-EXPORT-TJB term OWN_SUPERNET from community own_aggregate_supernet-tjb
set policy-options policy-statement EBGP-EXPORT-TJB term OWN_SUPERNET then accept
set policy-options policy-statement EBGP-EXPORT-TJB term TRANSIT-CUST-PREFIXES from community transit-cust-with-own-routes
set policy-options policy-statement EBGP-EXPORT-TJB term TRANSIT-CUST-PREFIXES then accept
set policy-options policy-statement EBGP-EXPORT-TJB term MANUAL-PREFIX-LIST from route-filter w.x.y.0/22 exact
set policy-options policy-statement EBGP-EXPORT-TJB term MANUAL-PREFIX-LIST then accept
set policy-options policy-statement EBGP-EXPORT-TJB term REJECT-ALL-ELSE then reject
set policy-options community ix_peer members ASN:nnnnn
set policy-options community transit-cust-with-own-routes members ASN:nnnnn
set policy-options community ix-tjb members ASN:nnnnn
set policy-options community own_aggregate_supernet-tjb members ASN:nnnnn
MikroTik
/interface ethernet set ether1 comment="IX_NAME"
/ip neighbor discovery set ether1 discover=no
/ip address add interface=ether1 address=x.x.x.x/y
/ipv6 address add interface=ether1 address=x::y/64 advertise=no
/tool romon port disable numbers=n
/routing bgp instance
set default as={MY_ASN} redistribute-other-bgp=yes
/ip address
add address=x.x.x.x/y interface="sfp-sfpplus5" network=x.x.x.x
/ipv6 address
add address=x::y/64 advertise=no interface="sfp-sfpplus5"
/routing bgp network
add network=x.x.x.x/y synchronize=no
add network=x::/y synchronize=no
/routing bgp peer
add in-filter=EBGP_V4_IN max-prefix-limit=1 name=IX_NAME_V4_LG out-filter=EBGP_V4_OUT remote-address=x.x.x.x remote-as={IX_NAME_LG_ASN} ttl=default
add address-families=ipv6 in-filter=EBGP_V6_IN max-prefix-limit=1 name=IX_NAME_V6_LG out-filter=EBGP_V6_OUT remote-address=x::y remote-as={IX_NAME_LG_ASN} ttl=default
add in-filter=EBGP_V4_IN max-prefix-limit=100000 name=IX_NAME_IPv4_RS1 out-filter=EBGP_V4_OUT remote-address=x.x.x.x remote-as={IX_NAME_RS_ASN} ttl=default
add in-filter=EBGP_V4_IN max-prefix-limit=100000 name=IX_NAME_IPv4_RS2 out-filter=EBGP_V4_OUT remote-address=x.x.x.x remote-as={IX_NAME_RS_ASN} ttl=default
add address-families=ipv6 in-filter=EBGP_V6_IN max-prefix-limit=50000 name=IX_NAME_IPv6_RS1 out-filter=EBGP_V6_OUT remote-address=x::y remote-as={IX_NAME_RS_ASN} ttl=default
add address-families=ipv6 in-filter=EBGP_V6_IN max-prefix-limit=50000 name=IX_NAME_IPv6_RS2 out-filter=EBGP_V6_OUT remote-address=x::y remote-as=37195 ttl=default
add in-filter=EBGP_V4_IN max-prefix-limit=500 name=Cloudflare_IPv4 out-filter=EBGP_V4_OUT remote-address=x.x.x.x remote-as={PEER_ASN} ttl=default
add address-families=ipv6 in-filter=EBGP_V6_IN max-prefix-limit=100 name=Cloudflare_IPv6 out-filter=EBGP_V6_OUT remote-address=x::y remote-as={PEER_ASN} ttl=default
/routing filter
add action=accept chain=EBGP_V4_OUT prefix={OWN_PREFIXES} prefix-length={MORE_SPECIFICS} protocol=bgp
add action=accept chain=EBGP_V4_OUT prefix={DOWNSTREAM_PREFIXES} prefix-length={MORE_SPECIFICS} protocol=bgp
add action=discard chain=EBGP_V4_OUT
add action=accept chain=EBGP_V6_OUT prefix={OWN_PREFIXES} prefix-length={MORE_SPECIFICS} protocol=bgp
add action=accept chain=EBGP_V6_OUT prefix={DOWNSTREAM_PREFIXES} prefix-length={MORE_SPECIFICS} protocol=bgp
add action=discard chain=EBGP_V6_OUT
add action=discard chain=EBGP_V4_IN prefix=127.0.0.0/8 prefix-length=8-32 protocol=bgp
add action=discard chain=EBGP_V4_IN prefix=10.0.0.0/8 prefix-length=8-32 protocol=bgp
add action=discard chain=EBGP_V4_IN prefix=169.254.0.0/16 prefix-length=16-32 protocol=bgp
add action=discard chain=EBGP_V4_IN prefix=172.16.0.0/12 prefix-length=12-32 protocol=bgp
add action=discard chain=EBGP_V4_IN prefix=192.168.0.0/16 prefix-length=16-32 protocol=bgp
add action=discard chain=EBGP_V4_IN prefix=100.64.0.0/10 prefix-length=10-32 protocol=bgp
add action=discard chain=EBGP_V4_IN prefix=192.0.0.0/24 prefix-length=24-32 protocol=bgp
add action=discard chain=EBGP_V4_IN prefix=192.0.2.0/24 prefix-length=24-32 protocol=bgp
add action=discard chain=EBGP_V4_IN prefix=198.51.100.0/24 prefix-length=24-32 protocol=bgp
add action=discard chain=EBGP_V4_IN prefix=198.18.0.0/15 prefix-length=15-32 protocol=bgp
add action=discard chain=EBGP_V4_IN prefix=198.51.100.0/24 prefix-length=24-32 protocol=bgp
add action=discard chain=EBGP_V4_IN prefix=203.0.113.0/24 prefix-length=24-32 protocol=bgp
add action=discard chain=EBGP_V4_IN prefix=224.0.0.0/4 prefix-length=4-32 protocol=bgp
add action=discard chain=EBGP_V4_IN prefix=240.0.0.0/4 prefix-length=4-32 protocol=bgp
add action=discard chain=EBGP_V4_IN prefix=255.255.255.255 prefix-length=4-32 protocol=bgp
add action=discard chain=EBGP_V4_IN prefix-length=25-32 protocol=bgp
add action=discard chain=EBGP_V4_IN prefix=0.0.0.0/0 protocol=bgp
add action=discard chain=EBGP_V4_IN prefix={OWN_PREFIXES} prefix-length={MORE_SPECIFICS} protocol=bgp
add action=discard chain=EBGP_V4_IN prefix={DOWNSTREAM_PREFIXES} prefix-length={MORE_SPECIFICS} protocol=bgp
add action=accept chain=EBGP_V4_IN prefix-length=0-24 protocol=bgp set-bgp-communities={YOUR_COMMUNITIES} set-bgp-local-pref={YOUR_LOCAL_PREF}
Mikrotik IPv6
/routing filter
add action=discard protocol=bgp chain=EBGP_V6_IN prefix=3ffe::/16 prefix-length=0-128
add action=discard protocol=bgp chain=EBGP_V6_IN prefix=2001:db8::/32 prefix-length=0-128
add action=accept protocol=bgp chain=EBGP_V6_IN prefix=2001::/32
add action=discard protocol=bgp chain=EBGP_V6_IN prefix=2001::/32 prefix-length=0-128
add action=accept protocol=bgp chain=EBGP_V6_IN prefix=2002::/16
add action=discard protocol=bgp chain=EBGP_V6_IN prefix=2002::/16 prefix-length=0-128
add action=discard protocol=bgp chain=EBGP_V6_IN prefix=::/8 prefix-length=0-128
add action=discard protocol=bgp chain=EBGP_V6_IN prefix=fe00::/9 prefix-length=0-128
add action=discard protocol=bgp chain=EBGP_V6_IN prefix=ff00::/8 prefix-length=0-128
add action=discard protocol=bgp chain=EBGP_V6_IN prefix={OWN_PREFIXES} prefix-length={MORE_SPECIFICS}
add action=discard protocol=bgp chain=EBGP_V6_IN prefix={DOWNSTREAM_PREFIXES} prefix-length={MORE_SPECIFICS}
add action=accept protocol=bgp chain=EBGP_V6_IN prefix=2000::/3 prefix-length=0-48 set-bgp-communities={YOUR_COMMUNITIES} set-bgp-local-pref={YOUR_LOCAL_PREF}
add action=discard protocol=bgp chain=EBGP_V6_IN prefix=::/0 prefix-length=0-128
add action=discard protocol=bgp chain=EBGP_V6_IN
BGP Communities
Our route servers support the following communities to control who sees your prefixes:
Standard Communities
0:{peer-as} - Do not advertise to {peer-as}
37195:{peer-as} - Advertise to {peer-as}
0:37195 - Advertise to nobody
37195:37195 - Advertise to everybody
Extended Communities
(ro,666,{peer-as}) - Do not advertise to {peer-as}
(ro,37195,{peer-as}) - Advertise to {peer-as}
(ro,666,37195) - Advertise to nobody
(ro,37195,37195) - Advertise to everybody
Large Communities
(37195, 0, {peer-as}) - Do not advertise to {peer-as}
(37195, 1, {peer-as}) - Advertise to {peer-as}
(37195, 0, 0) - Advertise to nobody
(37195, 1, 0) - Advertise to everybody
Path Prepending
(37195, 101, {peer-as}) - Prepend once to {peer-as}
(37195, 102, {peer-as}) - Prepend twice to {peer-as}
(37195, 103, {peer-as}) - Prepend thrice to {peer-as}
You will need to send either “Advertise to everybody, except specifics” OR “Advertise to nobody, except specifics.
BGP Session Configuration
Direct sessions
It is strictly forbidden to use any non-BGP method for exchanging prefixes over the exchange. Essentially this means:
- You must never point default or other static routes at any other exchange participant.
- You must disable OSPF, IS-IS, RIP, etc., on interfaces facing the internet exchange.
Configuring BGP sessions involves seeking the agreement to “peer” with other providers on the exchange. Typically, you ask a person responsible for peering at the other network, and you both configure a BGP session that connects each others’ routers over the internet exchange.
This BGP session should only exchange the network prefixes of your own network, and your clients, unless otherwise agreed, so you should consider filters which are similar to the example shown below:
router bgp aaaaa router-id b.b.b.b bgp log-neighbor-changes neighbor peer-napafrica peer-group neighbor peer-napafrica next-hop-self neighbor peer-napafrica soft-reconfiguration inbound neighbor peer-napafrica prefix-list bogons in neighbor peer-napafrica route-map napafrica-in in neighbor peer-napafrica route-map napafrica-out out neighbor x.x.x.1 remote-as yyyy neighbor x.x.x.1 description PEER: XYZisp neighbor x.x.x.1 peer-group peer-napafrica neighbor x.x.x.1 maximum-prefix 100 restart 15 ip prefix-list bogons seq 10 deny 10.0.0.0/8 le 32 ip prefix-list bogons seq 20 deny 172.16.0.0/12 le 32 ip prefix-list bogons seq 30 deny 192.168.0.0/16 le 32 ip prefix-list bogons seq 40 deny 169.254.0.0/16 le 32 ip prefix-list bogons seq 50 deny 192.0.2.0/24 le 32 ip prefix-list bogons seq 60 deny 224.0.0.0/4 le 32 ip prefix-list bogons seq 70 deny 240.0.0.0/4 le 32 ip prefix-list bogons seq 80 deny [myprefixes] le 32 ip prefix-list bogons seq 99 permit 0.0.0.0/0 le 24 ip prefix-list sendout seq 10 permit [myprefix] route-map napafrica-out permit 10 match ip address prefix-list sendout route-map napafrica-in permit 10 set local-preference 999
You should change the network statements and filters to suit the configuration which you have in place. If you have BGP downstream clients, then you should add them to your ‘sendout’ prefix list- or use communities to signal to your router what prefixes are eligible for sending to your peers. It is also good practice to build rules that test for a specific observed as adjacency.
Multilateral peering sessions
Multilateral peering allows you to set up a single peering session, over which you see many other networks.
The configuration is slightly different because the route-server does not participate in the forwarding of traffic, and the route-server also passes through the prefixes of many different ASNs in a single session.
You can use many advanced filtering techniques to signal the behaviour on the route-server, but in this example we will setup a simple session with no filtering of your prefixes. This is the right configuration for most networks.
router bgp aaaaa no bgp enforce-first-as neighbour peer-napafrica-rs peer-group neighbor peer-napafrica-rs next-hop-self neighbor peer-napafrica-rs soft-reconfiguration inbound neighbor peer-napafrica-rs prefix-list bogons in neighbor peer-napafrica-rs route-map napafrica-in in neighbor peer-napafrica-rs route-map napafrica-rs-out out neighbor peer-napafrica-rs remote-as rrrrr neighbor x.x.x.2 peer-group peer-napafrica-rs neighbor x.x.x.3 peer-group peer-napafrica-rs route-map napafrica-rs-out permit 10 match ip address prefix-list sendout set community zzz:Zzz
You will see that we send community zzz:zzz to the route server. This is a special signal that tells the route-server to send the prefix to all other participants. Note that there is a new peer-group. This allows you to shut down route-server sessions in the event of a problem without affecting your direct peering- and is necessary because we use a different route map for outgoing sessions.
When you connect to NAPAfrica, the support team will contact you to discuss route-server peerings- and whether they are a suitable system.